|
How to Fully Utilize the Storage Space in Your Garage
(ARA) - If you're like most people, your garage is mess. Garden tools are stacked in one corner; there's a pile of paint cans in another; the kids' bikes are parked in front of the cars; and your work bench -- well it's under those boxes -- you think.
A lot of people try to make their garages more user friendly by putting up peg board for the tools, hanging the bikes from hooks in the ceiling to get them out of the way, and building shelves along the walls to stack things on. "Those solutions are all well and good, but they don't utilize the available storage space to its full potential," says Kevin Shaha, president of Racor, Incorporated, a Sandpoint, Idaho company that specializes in garage storage solutions.
Shaha's company is about to introduce a new garage storage device that he says will revolutionize the industry. The HeavyLift system will allow you to store virtually anything out of the way and off the floor by making use of the space on the ceiling.
The easy-to-install do-it-yourself kit, which will be available through retailers nationwide, the Sears catalog, and online at www.racorinc.com in March 2005, includes heavy duty steel support beams which you will secure to the rafters, a four-foot-by-four-foot platform, a winding axle, enough vinyl coated steel cable for a ceiling up to 12 feet high, a hand crank and all the mounting hardware.
All you have to do is screw the support beams into the ceiling, attach the winding axle with the enclosed hardware, thread the steel cable through the support beam wheels and attach to the platform, then use the provided hand crank to raise and lower the platform. "You can safely store up to 250 pounds on it," says Shaha. "It's a great way to keep the lawnmower out of the way in the wintertime, or you can use it to store file boxes, third row car seats, outdoor furniture, tires, pretty much anything you can think of that normally takes up a lot of space."
An added plus is the safety factor. The American Ladder Institute reports that each year, more than a half million people are injured and 165,000 visit emergency rooms after falling off ladders. With a HeavyLift system in your garage, you'll never have to climb a ladder again. All you'll have to do to get down something heavy is hook up the hand crank and lower the load, then take whatever you need off the platform and crank it back up to the ceiling.
And once you get those bulkier items out of the way, you can make better use of the limited shelf space you have in the garage. So instead of using shelves to store boxes and other bulky items, you can put cleaners, auto accessories and other things you need immediate access to on them.
For more information about the HeavyLift system, or any of the other garage storage solutions offered by Racor, call toll-free (800) 783-7725 or log on to www.racorinc.com.
Courtesy of ARA Content
just-auto.com - Daily News
USA: Delphi scores a win in bankruptcy court
A New York bankruptcy court has given Delphi greater leeway to negotiate fresh contracts with its suppliers, in a significant victory for the ailing US car parts manufacturer, according to a report.
| UK: Jaguar downplays production cut reports
Jaguar has played down reports that parent company Ford is looking to cut production at the UK-based luxury carmaker.
| UK: Bank gives General Motors 50% chance of bankruptcy within two years
There is a 50% chance General Motors will file for bankruptcy within the next two years, research from BNP Paribas reportedly claimed.
| EXCLUSIVE: UK: Motor industry group unhappy with reliability survey
UK motor industry representative group the Society of Motor Manufacturers and Traders has demanded a used car warranty provider publish sample sizes and methodology to support its latest reliability survey.
| EXCLUSIVE: BRAZIL: Volkswagen unit building final air-cooled models in the world
Production of the last Volkswagen model line with an air-cooled engine will end in December.
| INDIA: China and India first and third largest markets by 2030
According to predictions China and India will become the first and third largest markets for motor vehicles by 2030.
| USA: Rising platinum price could hurt car makers
The rising price of platinum, used in catalytic converters, reportedly threatens to squeeze already thin margins of US automakers and may prompt them to increase use of cheaper palladium.
| NEW ZEALAND: New vehicle importers dismiss 'green' government buyer incentives
Cash incentives and penalties to change vehicle buyer behaviour, as suggested by the NZ Council for Sustainable Development are unnecessary, according to the Motor Industry Association (MIA), which represents new vehicle importers.
| USA: Ratings agency threatens Ford downgrade
Standard & Poor's Ratings Services has said it could lower Ford's credit rating by more than one notch in January after the car maker announces its fourth-quarter results.
| FRANCE: Michelin holding prices in Europe
Michelin has no firm plans to increase prices for replacement tyres in Europe despite such moves in North America and Japan, a spokeswoman for the group told Reuters on Wednesday.
| Rumours and reality behind Tata's 1,900 euros car
Indian carmaker Tata Motors (a part of the Tata conglomerate) has for some time held out the possibility of developing a very low-cost budget car (codenamed X1) that would be within the purchasing reach of a large section of India's population that is currently on two wheels. Tata Group leader Ratan Tata has made it something of a personal project. But what sort of vehicle would it be and where are we now? Deepesh Rathore and Tilak Swarup report.
| Japan's carmakers struggle to grow earnings
After a few years of very strong profit growth, Japan's vehicle manufacturers are struggling to maintian positive earnings momentum in the current fiscal year, despite strong worldwide volume growth and even stronger revenue growth. Toyota Motor, Honda Motor and Nissan Motor - Japan's big three automakers - reported weak or negative consolidated earnings growth in the first half of the year, while also reporting double-digit revenue growth from their global operations, writes Tony Pugliese.
| The onward march of diesel?
Before we all switch over to the hydrogen-based economy and the fuel cell becomes the green powertrain of choice for the automotive industry, there will be plenty of debate about the best and most environmentally sound powertrain solutions. How does diesel stack up against the gasoline-electric hybrid and where is diesel share heading? Rob Golding takes a look at some of the issues facing the proponents of diesel as well as the arguments put forward by one of the diesel engine's biggest champions, PSA's Jean-Martin Folz.
| Castle Bromwich Prepares For XK Assembly
'When you're putting together an aluminum-intensive vehicle, the sparks don't fly, but rivets are used in abundance.' This feature, looking at the aluminium (aluminum) manufacturing set-up for the new Jaguar XK - a key new model for the Jaguar brand - is republished from Automotive Design and Production. It is by Kevin Kelly, Senior Editor at that publication.
| No more a'roving
The failure of MG Rover earlier this year was another sorry chapter in the long decline of the indigenous volume car making industry in Britain. But the history associated with brands like Austin and Rover as well as the turbulent industrial times at British Leyland continues to provoke discussion. In his regular column for just-auto, Karl Ludvigsen offers some observations and reflections on a company that, at times and in various incarnations, represented the best and the worst of the British motor industry.
| Q&A with LuK
In an exclusive interview for just-auto, Matthew Beecham talked with Dr Peter Gutzmer, chairman of the board of management, LuK Group, about the group's plans for globalisation and future markets, expansion into Asia and its key technologies and product trends.
| Suppliers dissatisfied with OEMs over steel crisis; pessimistic on costs outlook
64% of suppliers surveyed in SupplierBusiness' recent survey of suppliers were either dissatisfied or very dissatisfied with the way that OEMs had addressed the steel problems of the industry. In addition, although most (71%) say the problems are a little better than six months ago, a significant number (one-third) still expects steel prices to rise again in the next six months, and very few (3%) expect steel prices to fall a lot. Most suppliers also see serious problems with other raw materials.
| Economics of VW-Porsche deal under the microscope
Interpretations of the VW-Porsche tie-up have varied. Some commentators have labelled it nepotism, corporate feudalism and a means of achieving protection from competition. Small shareholders at Porsche may not be ecstatic, but the proponents of the deal in both camps claim an industrial rationale for the move. Neil Winton reports.
| European car market fell back in October
After an incentives boosted September, the European car market fell back in October. But the German market continued to make progress and a 2005 market outcome in the region of 14.7 million units - a marginal gain on 2004 - is in prospect. This analysis is from JD-Power-LMC.
| Challenges ahead for the Chinese automotive components industry
The explosive growth of the Chinese car market may have hit the wall in the past year or so, but nobody could doubt the long-term potential of the market. Senior executives, including General Motors' chairman Rick Wagoner, believe the enormous pent-up demand for cars will eventually make China the world's largest market, eclipsing even the United States, writes Mark Bursa.
|
|